Intakes Exhausts Intercoolers Turbos / Pulley Kits Fueling Drivetrain Accessories UniGear UNIConnect All

Unitronic Carbon Fiber Cold Air Intake For 1.8/2.0 TSI Gen3 MQB(UH007-INA)Select Vehicle

Description

With extensive background in engineering the finest in Performance Software, Unitronic developed an intake system that maximizes performance of vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) engines.

This translates into a complete Cold Air Intake System that is sure to perform to the maximum, providing increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.

In addition, Unitronic's Cold Air Intake will enhance the sound of your turbocharger and diverter valve.

Features / Benefits

Optimized Design for Maximum Performance:
Unitronic specifically developed its air intake system to provide increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag.
2/2 Twill Prepreg Carbon Fiber Weave:
High quality material to give you a lightweight, durable and resistant airbox.
Stainless Steel Hardware:
Rust resistant hardware that will outlast your vehicle.
Quality Silicone Components:
Multi ply silicone turbo inlet hose is strong enough to avoid collapsing when the engine is under hard acceleration.
Autoclave Construction:
The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smoot surface finish.
Oversized Airbox Air Inlet for Increased Airflow:
Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct.
Enhanced Turbocharger Sound:
Unitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV).
Airbox Water Drainage Provision:
Open slots located at the bottom of airbox allow for the drainage of water.
Proprietary 3-inch Filter:
Unitronic’s proprietary 3’’ dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine.
Smooth Flow Transition:
Ferrule provision on air filter base to ensure a smooth and linear airflow transition between elements.
Direct Bolt-On Fitment with OEM Mounting Locations:
Utilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets.

Hardware Included

3-inch Powdercoated Aluminum Inner Intake Tube
Multi-ply Turbo Inlet Tube
Carbon Fiber Air Box
Proprietary 3-inch Dry-Filter (Cotton)
Hardware Kit

Recommended Software

Stage 1
Stage 1+
Stage 2 (If equipped with Unitronic's 3'' Downpipe)

Related Hardware

$494.99USD $549.99USD .You save $ 55USD until December 6th, 2024

Options
Click on a product for more information.

MQB Air Pump Breather Filter Element

$32.99USD

Unitronic Carbon Fiber Air Duct for MK7/8 & 8V/8Y

$326.69USD $362.99USD .You save $ 36USD until December 6th, 2024

Unitronic Coolant Reroute Hose For EA888 EVO4 & Gen3 MQB

$43.99USD $54.99USD .You save $ 11USD until December 6th, 2024

Buy Now

Video

Install

The Unitronic Cold Air Intake System for vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) is designed to be simple to install with all the hardware necessary included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.

A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.

Unitronic products are designed to meet all manufacturer tolerances and specification with regard to installation ease and tolerances. All of our products are developed to the highest standard of fitment and finish to ensure that it lasts the life of your vehicle.

Difficulty Level:
1 / 5

Installation Guide

UNITRONIC® is a registered trademark of Unitronic Corporation Inc.
© 2024 Unitronic Performance Software and Hardware. All Rights Reserved.
4633 Louis B-Mayer, Laval, Quebec, Canada, H7P 6G5 Tel.: 1.866.341.2447 / Fax: 1.866.714.9893

*Unitronic is not affiliated with any vehicle manufacturers. All Manufacturer and vehicle names and trademarks are used in this web site are for identification purposes only. All trademarks and trade dress such as Audi ®, Volkswagen ®, VW ®, Seat ®, Skoda ®, Porsche ®, Lamborghini® GTI ®, Golf ®,Golf R ®, Golf City ®, Alltrack ®, SportWagen ®, Cupra ®, Scirocco ®, Jetta ®, GLI ®, R32 ®, Rabbit ®, Passat ®, Passat CC ®, Tiguan ®, Beetle ®, New Beetle ®, EOS ®, Touareg ®, Phaeton ® DSG ®, S Tronic ®, TSI ®, TFSI ®, VR6 ®, A1 ®, A3 ®, S3 ®, RS3 ®, Q3 ® , A4 ®, S4 ®, RS4 ®, A5 ®, S5 ®,RS5 ® Q5 ®, SQ5 ®, A6 ®, S6 ®, RS6 ®, Q7 ®, SQ7 ®, A7 ®, S7 ®,RS7 ® A8 ®, S8 ®, R8 ®, TT ®, TTS ®, TTRS ®, Boxster ®, 911 ®, 996 ®, 997 ®, 991 ®, Panamera ®, Macan ®, 918 Spyder ®, Cayenne ®, Cayman ®, Huracan ®, Huracan Performante ® are registered trademarks of Volkswagen AG, Audi AG, and Porsche AG.

Unitronic Corporation Inc. is not affiliated with the Unitronics Group of Companies. To reach Unitronics Group please follow this link https://www.unitronics.com