Unitronic
Toll Free: 1.866.341.2447 My Cart (0)     FR
 
IntakesExhaustsIntercoolersTurbos / Pulley KitsFuelingDrivetrainAccessoriesUniGearUNIConnectAll

Unitronic 3 inch Intake System for 2.5TFSI EVO(UH022-INA)Select Vehicle

description-icon
Description
Unitronic's all-new 3'' Carbon Fiber Intake System for the 2.5TFSI EA855 EVO (DAZA) engines, found in the 8V.2 Audi RS 3 and 8S Audi TT RS delivers up to 41% more airflow over stock and is engineered for seamless integration with our high flowing 3 Inch Turbo Inlet Elbow to maximize performance on the 2.5TFSI EA855 EVO engines.

Built with reinforced materials, high quality EPDM couplers and stainless steel hardware, this Intake System is more than capable of standing up to the rigors of track use or daily driving.

This new Intake System is also available with a 4'' to 4'' intake tube.

Read the full release article here.
description-icon
Features / Benefits
  • 41%% increase in flow over stock
  • 2/2 Twill prepreg carbon fiber weave
  • Autoclave construction
  • EPDM couplers
  • High-quality stainless steel hose clamps
  • Direct bolt-on fitment with OEM Mounting Locations & EPDM mounting grommets
  • Smooth airflow transitions
  • Proven power, torque, and airflow gains
description-icon
Hardware Included
  • Unitronic Carbon Fiber Airbox
  • Carbon Fiber Air Duct
  • 4" to 3" Carbon Fiber Intake Tube
  • Carbon Fiber Transition Tube
  • 4" EPDM Inlet Coupler
  • 4" EPDM Flex Coupler
  • 6" Tapered Cone Air Filter
  • EPDM Mounting Grommets
  • All Necessary Hardware Included
description-icon
Related Hardware
uh022ina25tfsiintakehighlights.jpg
imageimageimageimageimageimageimageimageimageimageimageimageimageimageimageimageimageimage
Locate Dealer
$1,429.99USD
Options
Click on a product for more information.
Unitronic 6 inch Tapered Cone Race Air Filter for 2.5TFSI EVO
$43.99USD
Unitronic Intake Adapter for MY19+ 2.5 TFSI EVO
$76.99USD
Airflow Optimization
uh02022ina25tfsiintakecfdflow1.jpeg
To validate its form through function; Unitronic engineers strategically used CFD to maximize its efficiency. Every aspect of the design was studied closely, iteration after iteration, until reaching the maximums governed by the laws of physics. The CFD simulations illustrates how well airflow travels through the system. The primary focus was to achieve laminar flow and minimal pressure drop in all areas of the design. The result of this is an increase in volumetric efficiency.
Improved Flexibility
uh02022ina25tfsiintakeflowepdm.jpg
Unitronic high-quality EPDM silicone couplers offer a superior amount of flexibility over traditional silicone, while still offering the rigidity and strength needed to support high-powered 2.5TFSI’s. Unitronic’s engineers also created a design that allows for smooth, laminar airflow on the inside walls, while maintaining flexibility through the means of a non-collapsing structural rib profile. Unitronic's couplers are designed to perfectly align with the bead rolls on the carbon fiber tubes, to ensure a perfect and seamless connection; hose clamp guides ensure perfect alignment.
Airflow Validations
uh02022ina25tfsiintakeairflowchartred.jpg
Using its in-house Superflow SF-1020 Flow Bench, Unitronic Engineers further validated designs to ensure that the Unitronic Carbon Fiber Intake System effectively optimizes airflow in a variety of conditions. The OEM intake yielded a peak flow rate of 595 CFM at 28” of H2O (Aq), while the Unitronic Carbon Fiber 3” Intake System achieved 841 CFM with the Race Filter for a gain of 41% over the OEM Intake and flowed 830 CFM with the Sport Filter, a gain of 39% over the OEM Intake.
2019+ Model Year Support
uh023ina25tfsievomy19intakeadapter6.jpg
2019+ DAZA and DNWA models are supported with Unitronic’s Intake Adapter, allowing a smooth and seamless installation experience.


Learn more about other intake features here.
description-icon
Install
The Unitronic 3'' Carbon Fiber Intake System for vehicles equipped with the 2.5 TFSI EVO engine is designed to be simple to install with all the necessary hardware included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new Unitronic Intake system.

NOTE: Please make sure to purchase the MY19+ Intake Adapter for model year 2019+ equipped with the 2.5TFSI DAZA engine.
difficulty
Difficulty Level:
2 / 5
Installation Guide
View mobile version

UNITRONIC® is a registered trademark of Unitronic Corporation Inc.
© 2024 Unitronic Performance Software and Hardware. All Rights Reserved.
4633 Louis B-Mayer, Laval, Quebec, Canada, H7P 6G5 Tel.: 1.866.341.2447 / Fax: 1.866.714.9893
Sema Logo

*Unitronic is not affiliated with any vehicle manufacturers. All Manufacturer and vehicle names and trademarks are used in this web site are for identification purposes only. All trademarks and trade dress such as Audi ®, Volkswagen ®, VW ®, Seat ®, Skoda ®, Porsche ®, Lamborghini® GTI ®, Golf ®,Golf R ®, Golf City ®, Alltrack ®, SportWagen ®, Cupra ®, Scirocco ®, Jetta ®, GLI ®, R32 ®, Rabbit ®, Passat ®, Passat CC ®, Tiguan ®, Beetle ®, New Beetle ®, EOS ®, Touareg ®, Phaeton ® DSG ®, S Tronic ®, TSI ®, TFSI ®, VR6 ®, A1 ®, A3 ®, S3 ®, RS3 ®, Q3 ® , A4 ®, S4 ®, RS4 ®, A5 ®, S5 ®,RS5 ® Q5 ®, SQ5 ®, A6 ®, S6 ®, RS6 ®, Q7 ®, SQ7 ®, A7 ®, S7 ®,RS7 ® A8 ®, S8 ®, R8 ®, TT ®, TTS ®, TTRS ®, Boxster ®, 911 ®, 996 ®, 997 ®, 991 ®, Panamera ®, Macan ®, 918 Spyder ®, Cayenne ®, Cayman ®, Huracan ®, Huracan Performante ® are registered trademarks of Volkswagen AG, Audi AG, and Porsche AG.

Unitronic Corporation Inc. is not affiliated with the Unitronics Group of Companies. To reach Unitronics Group please follow this link https://www.unitronics.com